True STRYKER ST1000 Owner's Manual page 26

Optional Step 11-1—Change Power Inlet Assembly from 110V to 220V—Remove and Set Aside
Front Roller Cover and Power Cord Closure
NOTE: This step is for use on a circuit having a nominal rating no less than 208V and more than 240V. If your circuit is a
nominal rating of 110V go to step 12.
Tools Used in this Step
#2 Phillips Screwdriver
Using a #2 Phillips screwdriver, remove the power cord closure, power cord retainer, power cord, and front roller cover.
1
26
Item Part Number
2
3
1 ST1045 POWER CORD CLOSURE
2 ST1085R FRONT ROLLER COVER
3 TI0065 SCREW, M5X0.8X15
Description QTY
1
1
6