True STRYKER ST1000 Owner's Manual page 25

Step 10—Attach Console and Rear Console Cover
Tools Used in this Step
#2 Phillips Screwdriver
A. Using a #2 Phillips screwdriver, secure the console to the console mast using the hardware pre-assembled to the
console (00567800 // SCREW, M5-.8X12 COMBO PHILLIPS/COMMON TRUSS HEAD - ACG BLACK // QTY 4).
NOTE: If the console also has three screws (00567700 // SCREW, M4-.7 X 12 PPHMS SEMS // QTY 3)
pre-assembled, remove and set aside these screws. They are not used in this installation.
B. Connect the console cables and ensure all cables are routed inside the console mast to avoid pinching the cables.
NOTE: Console cable connections are included in the console owner's manual.
C. Using a #2 Phillips screwdriver secure the rear console cover to the console mast using the identifi ed hardware.
00567700
A
remove and
set aside these
screws, they are
not used in this
installation
Item Part Number
1 ST1016 REAR CONSOLE COVER
2 TCS0024
00567800
Description QTY
SCREW, M4X0.7X12
1
C
1
2
2
25