Table of Contents
Advertisement
Step 3—Attach Console Assembly
Tools Used in this Step
6mm Allen Wrench
A. Route the Power, I/O, Communication, and Coaxial cables from the console assembly through the opening on
the right pedestal upright assembly. Carefully set the console assembly on both the right and left pedestal upright
assemblies.
IMPORTANT! DO NOT pinch the cables.
B. Using the M8 hex bolts, fi nger tight the console assembly to the left and right pedestal upright assemblies.
NOTE: You will not fully tighten the hardware until step E.
C. Connect the Power, I/O Communication, Network, and Coaxial cables from the console assembly to the Power, I/O
Communication, Network, and Coaxial cables inside the right pedestal upright assembly.
D. Verify all cables have been securely connected and then carefully tuck all cables back inside the right pedestal upright
assembly.
E. Using a 6mm allen wrench, fully tighten the M8 hex bolts.
B
1
2
E
Item Part Number
1
TPS8123
SEMS HEX SOCKET BOLT, M8X1.25X90
2
ST1015
A
Description
CONSOLE ASSEMBLY
A
C
D
D
QTY
4
1
17
Advertisement
Table of Contents
