True STRYKER ST1000 Owner's Manual page 21

Step 6—Attach Base Side Trim Plastics
Tools Used in this Step
#2 Phillips Screwdriver
8mm Allen Wrench
A. Using an 8mm allen wrench, fully tighten the M10 bolts from step 1.
B. Using a #2 Phillips screwdriver secure the left and right side trim plastics to the base using the identifi ed hardware.
C. After all hardware has been fully tightened, press the left and right pedestal trim pieces into place.
4
Item Part Number
1 TCS4005
2 TI0065
3 ST1005
4 ST1014L BASE SIDE TRIM PLASTIC, LEFT
5 ST1014R BASE SIDE TRIM PLASTIC, RIGHT
C
3
A
B
5
Description
SCREW, M4X0.7X10
SCREW, M5X0.8X15
WASHER, 6X19X1.5
1
2
QTY
8
2
2
1
1
21