True TC400 Owner's Manual page 24

STEP 10—ATTACH CONSOLE AND CONSOLE REAR COVER
Tools Used in this Step
#2 Phillips Screwdriver
1. Using a #2 Phillips screwdriver, secure the console to the console mast using the hardware pre-assembled to the
console (00567800 // SCREW, M5-.8X12 COMBO PHILLIPS/COMMON TRUSS HEAD - ACG BLACK // QTY 4).
NOTE: If the console also has three screws (00567700 // SCREW, M4-.7 X 12 PPHMS SEMS // QTY 3)
pre-assembled, remove and set aside these screws. They are not used in this installation.
2. Connect the console cables and ensure all cables are routed inside the console mast to avoid pinching the cables.
NOTE: Console cable connections are included in the console owner's manual.
3. Using a #2 Phillips screwdriver, secure the rear console cover to the console mast.
00567700
24
Parts Used in this Step
PART
TCS4029
TC4033BK
Console
00567800
remove and
set aside these
screws, they are
not used in this
installation
DESCRIPTION
PHMS, M4X0.7X10MM, PHILLIPS
SUBASSEMBLY, REAR CONSOLE COVER, BLACK
Console
Mast
QTY
3
1
TC4033BK
TCS4029