True TC400 Owner's Manual page 16

OPTIONAL STEP 2—INSTALL 220V POWER INLET ASSEMBLY
NOTE: This step is only for units that will be used on a circuit having a nominal rating of more than 110-V.
Tools Used in this Step
#2 Phillips Screwdriver
1. Using a #2 Phillips screwdriver, remove the 110V power inlet assembly.
2. Disconnect the wires from the 110V power inlet assembly and transfer them to the 220V power inlet assembly.
IMPORTANT! The 220V panel has a green, blue, and brown dot. The dot color corresponds to the cable color.
• Move the green cable to the green dot.
• Move the blue cable to the blue dot.
• Move the brown cable to the brown dot.
3. Using a #2 Phillips screwdriver, secure the 220V power inlet assembly to the frame.
TC0033
110V Power Inlet Assembly
16
Parts Used in this Step
PART
TC0033
TC0441BK
00603800BK
TC0441BK
DESCRIPTION
BOLT M5XP0.8X8
POWER INLET ASSEMBLY 110V
POWER INLET ASSEMBLY 220V
00603800BK
TC0033
220V Power Inlet Assembly
QTY
3
1
1