True TC400 Owner's Manual page 20

STEP 6—TIGHTEN PEDESTALS AND REATTACH MOTOR AND CAP COVERS
Tools Used in this Step
#2 Phillips Screwdriver
17mm Wrench
5mm Allen Wrench
1. Using a 5mm allen wrench and a 17mm wrench, fully tighten the hardware on both the left and right pedestals.
2. Slide the motor cover back into place.
3. Using a #2 Phillips screwdriver, secure the motor cover to the frame.
4. Using a #2 Phillips screwdriver, secure the left and right motor cover caps to the frame.
20
Parts Used in this Step
PART DESCRIPTION
PS0035 SCREW, M5XP0.8X15MM SCA5-15
TC4036LBK SUBASSEMBLY, CAP, MOTOR COVER-LH
TC4036RBK SUBASSEMBLY, CAP, MOTOR COVER-RH
TC4035BK SUBASSEMBLY, MOTOR COVER
TC4035BK
PS0035
PS0035
TC4036LBK
TC4036RBK
QTY
9
1
1
1