Introduction; Typographical Conventions; Warning Signs; Note Signs - JUMO ATH SW Series Operating Instructions Manual

1.1

Typographical conventions

1.1.1 Warning signs

V
Danger
This symbol is used where there may be danger to personnel if the instruc-
tions are disregarded or not followed accurately.
A
Caution
This symbol is used where there may be damage to equipment if the instruc-
tions are disregarded or not followed accurately.

1.1.2 Note signs

H
Note
This symbol is used to draw your special attention to a remark.
v
Reference
This symbol refers to additional information in other chapters or sections.
1
abc Foonote
Footnotes are comments which refer to specific parts of the text. Footnotes
consist of two parts:
Marking in the text and the footnote text.
The text markings are arranged as continuous superscript numbers.
The footnot text (in smaller typeface) is placed at the bottom of the page and
starts with a superscript number.
✱
Action
This symbol indicates that an action to be performed is described.
The individual steps are marked by this asterisk, e. g.
✱ Open housing
All manuals and user guides at all-guides.com

1 Introduction

5