Introduction; Typographical Conventions; Warning Signs; Note Signs - JUMO KM-70 Operating Instructions Manual

1.1

Typographical conventions

1.1.1 Warning signs

V
Danger
This symbol is used when there may be danger to personnel if the
instructions are ignored or not followed correctly.
A
Caution
This symbol is used when there may be damage to equipment if the
instructions are ignored or not followed correctly.

1.1.2 Note signs

H
Note
This symbol is used when your special attention is drawn to a remark.
v
Reference
This symbol refers to further information in other chapters or sections.
1
abc Footnote
Footnotes are remarks that refer to specific points in the text. Footnotes
consist of two parts:
A marker in the text and the footnote text.
The markers in the text are arranged as continuous superscript numbers.
The footnote text (in smaller typeface) is placed at the bottom of the page and
starts with a superscript number.
Action
This symbol indicates that an action to be performed is described.
The individual steps are marked by this asterisk, e. g.
Select setpoint

1 Introduction

5