Self-Monitoring; Response To A System Fracture; Response To Falling Below The Temperature Limit; Use Of The Stw (Stb) As Stb - JUMO ATH SW Series Operating Instructions Manual

5 Settings
5.3

Self-monitoring

5.3.1 Response to a system fracture

H
On the STB and STW (STB), a fracture of the measuring system (leakage) will
cause the circuit to open permanently.
On the STB, the microswitch will additionally be locked.

5.3.2 Response to falling below the temperature limit

H
If the probe cools down to below the minimum temperature of -10°C , the cir-
cuit will open (STW (STB) and STB).
As the probe temperature rises to above the minimum temperature, the STB
has to be reset manually.
➩ Chapter 5.2 "Resetting the STB", page 23.
The STW resets itself automatically.
5.4

Use of the STW (STB) as STB

V
The lockout function to DIN 3440 must be ensured by the connected circuitry.
This circuit must conform to DIN VDE 0116, Section 8.7.
24
All manuals and user guides at all-guides.com