Introduction; Typographical Conventions; Warning Signs; Note Signs - JUMO ATH.-SE Series Operating Manual

1.1

Typographical conventions

1.1.1 Warning signs

V
A

1.1.2 Note signs

H
v
1
abc
✱
Danger
This symbol is used where there may be danger to personnel if the instruc-
tions are disregarded or not followed accurately.
Caution
This symbol is used where there may be damage to equipment if the instruc-
tions are disregarded or not followed accurately.
Note
This symbol is used to draw your special attention to a remark.
Reference
This symbol refers to additional information in other chapters or sections.
Footnote
Footnotes are comments which refer to specific parts of the text. Footnotes
consist of two parts:
1) The marking in the text, arranged as continuous superscript numbers.
2) The footnote text, at the bottom of the page and preceded by a superscript
number.
Action
This symbol marks the description of a required action.
The individual steps are indicated by an asterisk, e.g.
✱ Select setpoint

1 Introduction

5