Resetting The Stb - JUMO ATH SW Series Operating Instructions Manual

5.2

Resetting the STB

After the temperature has dropped by about 10% of the span below the set
limit (safe temperature limit), the microswitch can be reset.
✱ Remove the cover screws ( 1 ),
lift cover ( 2 ).
✱ Press reset button ( 3 )
until the microswitch is reset.
✱ Put cover back on ( 2 ), tighten
cover screws ( 1 ).
All manuals and user guides at all-guides.com
5 Settings
( 1 ) ( 1 )
( 1 )
( 1 )
( 2 )
1 1
2
4 2
( 1 ) ( 1 )
( 1 )
( 1 )
( 2 )
( 3 )
23