Closing The Housing - JUMO ATH SW Series Operating Instructions Manual

4.2.1 Closing the housing

✱ Make sure that the plastic seal ( 1 ) in the housing base ( 3 ) is seated cor-
Thermostats as
TW, STW (STB), rectly.
STB
✱ Place the housing top ( 2 ) onto the housing base ( 3 ).
( 1 )
✱ Tighten the cover screws ( 4 ).
All manuals and user guides at all-guides.com
( 4 )
( 4 )
( 2 )
( 3 )
hex
4 Installation
( 4 )
( 4 )
cable gland
M 20x1.5
21