Pad Set - Roland SP-404MKII Manual

Appendix
VERSION
Displays the version of this unit.

PAD SET

TRIGGER
Parameter Value
Sets how the volume changes according to how hard you strike a pad.
This is the standard setting. This produces the most natural balance between playing dynamics and
Lin
volume change.
Curve
Type Exp Compared to "Lin", playing strongly produces a greater change in volume.
Log Compared to "Lin", playing softly produces a greater change in volume.
Fix Sets the volume at a fixed level of 127.
1– This sets the minimum sensitivity of the pads, at which the trigger signal is received only when a pad
Threshold 100 is struck with at least a certain amount of force (velocity). This can be used to prevent a pad from
sounding due to vibrations from other pads.
0– The sensitivity is adjusted with the curve as-is. The larger the value, the greater the sensitivity is when
Gain
100 playing the pads.
1–10 Adjusts the sensitivity of the pads to repeated strikes. With lower values, the pads detect repeated
Trig Span strikes within a shorter time interval. Set this value higher if you don't want the pad to accidentally
detect repeated strikes.
LED
Parameter Value
LED 1–10 Sets the brightness of the indicators on the buttons and pads. This sets the brightness when the
Brightness buttons or pads are highlighted.
1–10 Sets the brightness of the indicators on the buttons and pads. This sets the brightness when the
LED Glow
buttons or pads are not highlighted.
This selects the color of the pad illumination.
Pad LED The pads light up in the color set in "BUS COLOR".
BUS
Mode In this mode, the pad colors change according to the bus through which the sample audio is sent.
PAD The pads light up in the color set in "PAD COLOR".
BUS COLOR
126
Explanation
Explanation