Roland SP-404MKII Manual page 151

Function
*3: Output when MIDI Sync Out is "ON" and when there is no tempo input from an external device.
*4: Enabled when this unit is in remote mode (when a tempo signal is received from an external device).
*5: All samples stop playing back when the MIDI cable is unplugged.
*6: Enabled when playing samples in chromatic mode (MIDI CH 16).
*7:
CH 1: BUS 1
CH 2: BUS 2
CH 3: BUS 3
CH 4: BUS 4
CH 5: INPUT
CC#19
CC#83
CC#16
CC#17
CC#18
CC#80
CC#81
CC#82
*8:
CC#7
CC#8
CC#20
CC#21
CC#22 [SYNC] button (0: Off, 127: On) [SYNC] button (0: Off, 127: On) [SYNC] button (0: Off, 127: On)
CC#23 [CUE] button (0: Off, 127: On)
CC#24 [BEND+] button (0: release the
CC#25 [BEND-] button (0: release the
CC#26 [BPM+] button (0: release the
CC#27 [BPM-] button (0: release the
*9:
PC#0
PC#1
:
PC#15
Mode 1: OMNI ON, POLY
Mode 2: OMNI ON, MONO
Mode 3: OMNI OFF, POLY
Mode 4: OMNI OFF, MONO
○: Yes
×: No
Transmitted
Control change message numbers and corresponding EFX controls
EFX switch (0–63: OFF, 64–127: ON)
EFX number (0–127)
"Control change messages and corresponding
Ctrl 1 (0–127)
Ctrl 2 (0–127)
Ctrl 3 (0–127)
Ctrl 4 (0–127)
Ctrl 5 (0–127)
Ctrl 6 (0–127)
Control change message numbers and corresponding controllers in DJ mode
MIDI channel 1 (CH1 sample)
[Ctrl 1] knob: CH1 volume
slider (0–127)
[Ctrl 3] knob: X-FADE (CH1:
CH2 = 127:0–0:127)
[ñ] button (0: pause, 127:
play)
[õ] button (0: release the
button, 127: press the button)
button, 127: press the button)
button, 127: press the button)
button, 127: press the button)
button, 127: press the button)
Program change numbers and corresponding patterns
Recognized
MIDI channels
effects(P.140)"
MIDI channel 2 (CH2 sample)
[Ctrl 2] knob: CH2 volume
slider (0–127)
-
[ñ] button (0: pause, 127:
play)
[õ] button (0: release the
button, 127: press the button)
[CUE] button (0: Off, 127: On)
[BEND+] button (0: release the
button, 127: press the button)
[BEND-] button (0: release the
button, 127: press the button)
[BPM+] button (0: release the
button, 127: press the button)
[BPM-] button (0: release the
button, 127: press the button)
Pattern 1
Pattern 2
:
Pattern 16
Remarks
MIDI channels 3 (pattern
sequencer)
[Ctrl 1] knob: pattern sequencer
volume slider (0–127)
-
[ñ] button (0: pause, 127:
play)
[õ] button (0: release the
button, 127: press the button)
[CUE] button (0: Off, 127: On)
[BEND+] button (0: release the
button, 127: press the button)
[BEND-] button (0: release the
button, 127: press the button)
[BPM+] button (0: release the
button, 127: press the button)
[BPM-] button (0: release the
button, 127: press the button)
Appendix
151