Shortcuts That Use The [Remain] Button; Shortcuts That Use The [Value] Button - Roland SP-404MKII Manual

Appendix
While holding down the
[SHIFT] button
[REC] button
Bank [A/F]–[E/J] buttons
[REMAIN] button (at least
three seconds)
[COPY] button
[EXIT] button

Shortcuts that use the [REMAIN] button

While holding down the [REMAIN] button
Pads [1]–[16]
Bank [A/F]–[E/J] buttons
[MFX] button
[BUS FX] button
Edits the following parameters on the
pitch/speed settings screen
●
SPEED
●
PITCH
●
VOLUME
●
PAN
●
BPM
●
BPM SYNC
●
GATE
●
LOOP
●
REVERSE
Edits the following parameters on the envelope
settings screen
●
ATTACK
●
HOLD
●
RELEASE
●
BPM SYNC
●
GATE
●
LOOP
●
REVERSE

Shortcuts that use the [VALUE] button

While holding down the [VALUE] knob
Pads [1]–[16]
[BUS FX] button
[SUB PAD] button
Effect buttons ([FILTER+DRIVE]–[MFX]
button)
[GATE] button
144
Function
TR-REC Switches to pattern recording using TR-REC.
This lets you record a sample onto the pattern that's playing back.
* Enabled only when playing back a pattern
BANK VOLUME Adjusts the volume for the specified bank overall.
LIVE MODE Use this to disable buttons that are not used when playing live (sampling and
edit-related buttons).
BANK PROTECT This function prevents the samples and patterns assigned to a pad from being
copied, overwritten by editing or accidentally deleted.
STOP Stops the playback of all samples.
Sets which sample playback audio is sent to which bus (meaning which
effects are used) for each sample.
Sets the bus send destination for all samples in a bank.
Makes the effect edit screen keep displaying.
You can swap the effects of BUS 1 and BUS 2.
Lets you simultaneously edit the parameters of samples that are registered to
the same bank.
Lets you simultaneously edit the parameters of samples that are registered to
the same bank.
Selects a sample (no sound is produced).
Also, selects a pattern when [PATTERN SELECT] is lit (the pattern does not play back).
Temporarily bypasses BUS 3 and BUS 4.
This minimizes the slight differences in timing when you play multiple samples at the
same time.
Applies effects only while you hold down the effect buttons (EFFECT GRAB).
Switches the "one-shot playback" sample playback mode on/off.
Explanation
Function (explanation)
Function (explanation)