Copying Parameter Settings To All Pads (Set All Pad); Assigning A Name (Name) - Roland SPD-SX Owner's Manual

Copying Parameter Settings to All Pads (SET ALL PAD)

Here's how to copy the value of the selected parameter to all pads of the same kit.
1.
In any of the KIT PAD screens, move the cursor to the parameter that you want to copy.
2.
Choose QUICK MENU
3.
Press the [ENTER] button.
A confirmation message will appear.
If you decide to cancel the operation, press the [EXIT] button.
4.
Press the [ENTER] button once again.
The value will be copied to all pads of the same kit.

Assigning a Name (NAME)

Here's how to assign a name to a kit or wave.
1.
In the KIT screen (or the top screen, etc.), choose QUICK MENU
The NAME screen will appear.
* The NAME screen will also appear for other quick Menu items (WAVE NAME (p. 64), CHAIN NAME (p. 56)).
2.
Enter the name.
Button
[-] [+] buttons
Cursor buttons
[F1] (A a 1!) button
[F2] (INSERT) button
[F3] (DELETE) button
MEMO
A kit can be given a sub name (SUB NAME) in addition to the kit name.
The sub name can be used as a reminder about the kit, such as date of creation, the name of the song you are using it in,
etc.
If DISP MODE (p. 59) is set to "SUB NAME, " the sub name will be shown in the top screen.
3.
Press the [ENTER] button to finalize the name.
SET ALL PAD.
Explanation
Change characters.
Move the cursor to the character you want to change.
Switches the type of character at the cursor location between uppercase, lowercase, and numerals/symbols.
Inserts a space at the cursor location, moving subsequent characters one space to the right.
Deletes the character at the cursor location, moving subsequent characters one space to the left.
Customizing a Kit
KIT NAME.
47