Efx Set - Roland SP-404MKII Manual

Parameter Value
Default, 1–127,
White
BUS1 Color
BUS2 Color
DRY Color
PAD COLOR
Parameter Value
Default, 1–127,
PAD-1–PAD-
White
16

EFX SET

FAVORITE
Parameter Value
TYPE A, TYPE B
Routing
1–16
FAVORITE
BUS 3, BUS 4
Parameter
Bypass, 303 VinylSim, 404 VinylSim, Cassette Sim, Lo-fi, Downer, Compressor,
Equalizer, Isolator, Super Filter, Filter+Drive, WrmSaturator, Overdrive, Distortion,
Crusher, Ring Mod, SBF, Resonator, Hyper-Reso, Chromatic PS, Reverb, Ha-Dou, Zan-
EFX TYPE Zou, Sync Delay, TimeCtrlDly, Ko-Da-Ma, Tape Echo, Chorus, JUNO Chorus, Flanger,
Phaser, Wah, Slicer, Tremolo/Pan, To-Gu-Ro, DJFX Looper, Scatter, SX Reverb, SX
Delay, Cloud Delay
DIRECT
Changes the pad color for each bus through which sample audio is sent.
This can be set for BUS 1, BUS 2 and DRY respectively.
This is enabled when Pad LED Mode is "BUS".
●
Hold down the [SHIFT] button and turn the [VALUE] knob to change the value in
steps of 10.
Specifies the colors of individual pads.
This is enabled when Pad LED Mode is "PAD", and when a sample is either playing back
or stopped while in sample mode.
Selects the routing (connection) of the bus to which effects are assigned.
"Configuring the Effect Routing(P.108)"
Selects the combination of effects assigned to BUS 3 and BUS 4.
"Changing the Effects Assigned to BUS 3 and BUS
Value
Explanation
Explanation
Explanation
4(P.109)"
Selects the effects
assigned to BUS 3 or
BUS 4.
For details on the
parameters of each
effect, refer to
List(P.129)".
Appendix
Explanation
"MFX
127