Roland SP-404MKII Manual page 124

Appendix
Parameter Value
Def
Long
This selects the point (time) at which reverse playback begins when you press the [REVERSE] button during
sample playback.
Reverse Type 404
303
This selects where the audio signal input from the USB port is sent.
LINE IN
USB IN
MIX OUT
This lets you change how the audio is processed when changing the playback speed of a sample in DJ
mode.
VINYL
DJ mode TS
BACKING
type
ENSEMBLE
Bend Sens 10–200
(DJ)
Selects the character code for filenames that can be recognized by this unit when you import a sample.
●
The unit must be restarted once you've changed the settings and pressed the [EXIT] button to exit the
SYSTEM screen.
FileSystem Multi-Byte
Latin1
CLICK
Parameter Value
OFF, ON
Output Assign
Click Level 1–5
Metronome:REC OFF, ON
Metronome:PTN OFF, ON
This selects how sampling or resampling starts.
OFF
1 MEAS, 2
Count-In:REC
MEAS
WAIT
This selects how pattern recording begins.
OFF
1 MEAS, 2
Count-In:PTN
MEAS
WAIT
MIDI
124
Recording time: 25 sec (max.)
Recording time: 40 sec (max.)
Starts reverse playback at the sample's end point. This works the same as the SP-404SX.
Starts reverse playback immediately from the playback position of the current sample.
This works the same as the SP-303.
Mixes the USB audio signal with the audio signal from the LINE IN jacks.
Mixes the USB audio signal with the MIXER output, without going through the INPUT
FX or BUS FX.
Changes the playback speed and pitch at the same time, like an analog record.
Independently controls the playback speed and pitch.
Processes the sound as appropriate for musical instruments whose sounds have a
noticeable decay.
Independently controls the playback speed and pitch.
Processes the sound as appropriate for musical instruments that have a sustaining
sound.
Sets how quickly the pitch of a sample changes when you press the [BEND-] and
[BEND+] pads.
Letters, numbers, symbols, double-byte characters (kanji, hiragana, katakana)
●
This lets the unit recognize and import files with filename that use double-byte
and similar characters. Note that this unit doesn't correctly display double-byte
characters, and these characters appear garbled.
Letters, numbers, symbols
●
With this setting, files with double-byte characters in their filenames can't be
recognized by this unit.
When this is set to ON, the metronome sound is output from the LINE OUT jacks and from
the USB port.
Sets the volume of the metronome.
When this is ON, the metronome sound is output while you are sampling or resampling.
When this is ON, the metronome sound is output when a pattern is being recorded.
Sampling or resampling starts at the same time that you press the [REC] button.
When you press the [REC] button, a count-in begins one or two measures before where
sampling or resampling begins.
Sampling or resampling starts when you press a pad to play back a sample, or when
audio is detected from an external device.
Pattern recording starts at the same time that you press the [REC] button.
When you press the [REC] button, a count-in of one or two measures begins before
pattern recording starts.
Pattern recording starts when you press a pad to play back a sample, or when audio is
detected from an external device.
Explanation
Explanation