Table of Contents
Advertisement
Error Messages
Error messages
The batteries are nearly depleted.
Battery Low!
Unsupported
The file type is not supported on this unit.
FILE
No SD card is inserted. Also, the SD card
No SD CARD!
might not be fully inserted.
An unsupported type of SD card has been
Unsupported
SD Card!
inserted.
SD CARD
The write-protect feature has been enabled
Protected!
on the SD card.
SD CARD Full!
The SD card has run out of free space.
Internal Storage
There is not enough storage capacity left
Full!
on this unit.
A problem has occurred with the internal
Storage Error!
storage.
The function can't be executed because
bank protect is enabled.
Protected!
The maximum number of notes that can be
recorded to the pattern sequencer has
Max Length
Pattern
been exceeded.
Explanation
Replace the batteries, or switch to an AC adaptor.
"About the Power
Supply(P.8)"
→
Check the file extension, format and folder directory.
"Importing/Exporting (Using the SD
→
Turn off the power, and make sure that the SD card is fully
inserted before you turn the power back on.
Please format the SD card.
"Formatting an SD
Card(P.121)"
→
Unlock the lock switch on the left side of the SD card.
Delete any unneeded data on the card.
Delete any unneeded data on the unit.
Try performing a factory reset.
"Restoring the Factory Settings (FACTORY
→
Use a bank for which bank protect is disabled, or disable bank
protect on the currently selected bank.
"Selecting a Sample
Bank(P.12)"
→
Bank(P.67)"
"Protecting a Sample
Pattern
(PROTECT)(P.80)"
Reduce the number of notes in the pattern, or shorten and split
the pattern to record.
"Creating a New Pattern (Real-time
→
"Creating a New Pattern
(TR-REC)(P.62)"
Action
Card)(P.114)"
RESET)(P.122)"
"Selecting a Pattern
(PROTECT)(P.57)"
"Protecting a
Recording)(P.60)"
Appendix
147
Advertisement
Table of Contents
