Mfx List; Filter+Drive; Resonator; Sync Delay - Roland SP-404MKII Manual

MFX List

Filter+Drive

This is a filter with overdrive.
It cuts the specified frequencies and adds distortion.
Parameter Value
CUTOFF 20–16000 (Hz)
0–100
RESONANCE
DRIVE 0–100
Sets the type of filter.
FLT TYPE HPF
LPF
LOW FREQ 20–16000 (Hz)
LOW GAIN -24–24 (dB)

Resonator

This effect uses "Karplus-Strong synthesis", which is often used in physical modeling of sounds.
This lets you alter the sound with a maximum of six "resonators" that match different keys or chords.
Parameter
ROOT C1–G9
BRIGHT 0–100
FEEDBACK 0–99 (%)
Root, Oct, UpDn, P5, m3, m5, m7, m7oct, m0, m11,
CHORD
M3, M5, M7, M7oct, M9, M11
PANNING 0–100
0–100
ENV MOD

Sync Delay

Gives an echo effect in sync with the tempo.
Parameter
1/32, 1/16T, 1/32D, 1/16, 1/8T, 1/16D, 1/8, 1/4T, 1/8D, 1/4,
TIME
1/2T, 1/4D, 1/2, 1/1T, 1/2D, 1/1
FEEDBACK 0–99 (%)
LEVEL 0–100
FLAT, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800
L DAMP F
(Hz)
630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000,
H DAMP F
6300, 8000, 10000, 12500, FLAT (Hz)

Isolator

This effect lets you cut off sounds in a specified frequency range.
Parameter
LOW -INF, -41.87–+12 (dB)
MID -INF, -41.87–+12 (dB)
HIGH -INF, -41.87–+12 (dB)
Sets the cutoff frequency range in which the filter works.
Adjusts the filter's resonance level.
The larger the value, the more that the frequency range set in CUTOFF is emphasized.
Adds distortion.
Cuts off the low frequencies.
Cuts off the high frequencies.
Adjusts the frequency range that's boosted or cut by the LOW GAIN parameter.
Adjusts the amount of boost/cut applied to the frequency range that's set in LOW FREQ.
Value
Value
Value
Adjusts the amount of boost/cut in the low-frequency range.
Adjusts the amount of boost/cut in the mid-frequency range.
Adjusts the amount of boost/cut in the high-frequency range.
Explanation
Explanation
Sets the reference pitch (root note).
Adjusts the tonal brightness.
Adjusts the amount of feedback for the effect.
Sets the composite notes (chord) to resonate.
Sets the panning for the resonator.
Larger values increase the amount of feedback
according to the input level.
Explanation
Sets the sound delay time.
Adjusts the amount of feedback for the effect.
Adjusts the volume of the effect sound.
Sets the frequency range that is attenuated each
time the delay repeats.
Explanation
Appendix
129