Pad Set - Roland SP-404MK2 Reference Manual

Appendix
Parameter Value
GAIN
Parameter
OFF, ON
Attenuator
Reduces the noise floor in the signal input from the LINE IN and INPUT jacks.
OFF
Noise Gate
-9dB, -12dB, -18dB
-Inf
LINE OUT 0, +6, +12 (dB)
PHONES OUT -18, -12, -6, 0, +6, +12 (dB)
USB OUT -24, -12, 0 (dB)
VERSION
Displays the version of this unit.

PAD SET

TRIGGER
Parameter Value
Sets how the volume changes according to how hard you strike a pad.
This is the standard setting. This produces the most natural balance between playing dynamics and
Lin
volume change.
Curve
Type Exp Compared to "Lin", playing strongly produces a greater change in volume.
Log Compared to "Lin", playing softly produces a greater change in volume.
Fix Sets the volume at a fixed level of 127.
1– This sets the minimum sensitivity of the pads, at which the trigger signal is received only when a pad
Threshold 100 is struck with at least a certain amount of force (velocity). This can be used to prevent a pad from
sounding due to vibrations from other pads.
0– The sensitivity is adjusted with the curve as-is. The larger the value, the greater the sensitivity is when
Gain
100 playing the pads.
1–10 Adjusts the sensitivity of the pads to repeated strikes. With lower values, the pads detect repeated
Trig Span strikes within a shorter time interval. Set this value higher if you don't want the pad to accidentally
detect repeated strikes.
LED
110
The inputted MIDI signals are also transmitted to the internal sound module at that time.
Value
When this is ON, the gain of the audio input from the LINE IN jacks is lowered.
Turn the Attenuator on when the LINE IN input seems to be distorting.
The noise gate is not used.
Reduces the noise floor at the specified level.
Reduces the noise floor to the bare minimum.
Sets the gain of the audio output from the LINE OUT jacks.
Sets the gain of the audio output from the PHONES OUT jacks.
Sets the gain of the audio output from the USB port.
Explanation
Explanation
Explanation