Table of Contents
Advertisement
Fire Alarm Control Panel PL-1000
15.6 System test – zones
1.
Follow the steps to enter in "Configuration" menu, select "Test" to access to the related options, then select "Zones" icon to view the Zone list.
2.
Click on the icon
near the Zone you would like to put in Test. The Test icon
example Z02.
Press the back arrow
for go back to the main screen.
3.
To end the Test, click on the related Test icon
Press the back arrow
to go back to the main screen.
54
the Zone. The Enabled icon
will be displayed near the Zone and label will be updated.
will be displayed near the selected Zone and label will be updated; in this
M-169.1-SERIE-PL-EN / 09.2022
Advertisement
Table of Contents
