KEYIN1
78
KEYIN2
79
KEYIN3
80
KEYOUT0
83
KEYOUT1
84
KEYOUT2
113
KEYOUT3
114
3.17. SD Card Interface
The module supports SDIO 2.0 interface for SD card.
Table 24: Pin Definition of SD Card Interface
Pin Name
Pin No.
SD_DET
23
SDIO1_DATA3
28
SDIO1_DATA2
29
SDIO1_DATA1
30
SDIO1_DATA0
31
SDIO1_CLK
32
SDIO1_CMD
33
SDIO1_VDD
34
The following figure shows a reference design of SD card interface.
EC200U_Series_Hardware_Design
DI
Matrix keyboard input1
DI
Matrix keyboard input2
DI
Matrix keyboard input3
DO
Matrix keyboard output0
DO
Matrix keyboard output1
DO
Matrix keyboard output2
DO
Matrix keyboard output3
I/O
Description
DI
SD card detect
DIO
SDIO data bit 3
DIO
SDIO data bit 2
DIO
SDIO data bit 1
DIO
SDIO data bit 0
DO
SDIO clock
DIO
SDIO command
PO
SDIO power supply
LTE Standard Module Series
it can be used as KEYIN0
after startup.
1.8 V power domain.
If unused, keep it open. The
KEYIN1 cannot be pulled up
before startup.
1.8 V power domain.
If unused, keep them open.
Comment
1.8 V power domain.
If unused, keep it open.
1.8/3.2V power domain.
If unused, keep them open.
50 / 94