Table of Contents
Advertisement
WARNING!
After a power outage or after the appliance is switched off, additional function settings
will remain stored for no more than a few minutes. Then, all settings, except for the acoustic
signal volume and display dimmer will be reset to factory defaults.
22
6. Adaptive function
This function allows adjusting the set cooking time. The function is
deactivated as a factory default, but it can also be activated.
When the function is activated, the most recent cooking program duration
settings are displayed. Values from the most recent cooking session will
be used.
AdPt will appear on the display unit. To deactivate the function, touch
the
or
key to select off. Follow the same procedure to re-activate
the function. Select on on the display unit.
7. Factory settings
This function allows resetting the appliance to factory settings. FAct will
appear on the display unit. Touch the
choose the factory settings, and confirm by pressing and holding
the
key. Hold the key until all lit dashes disappear.
8. Water hardness
Touch the
or
The default setting is level 5.
Wh 1 means the softest water.
Wh 5 means the hardest water.
9. Descaling
You can activate the descaling function yourself, or it can be suggested
by the oven after a certain number of steam function use cycles (dEcL
will appear on the display unit).
To activate the function, touch the
no to deactivate.
key to choose between five water hardness levels.
or
or
key to select rES to
key to select YES. Select
Advertisement
Table of Contents
