Do you have a question about the BID75211XUK and is the answer not in the manual?
Questions and answers
Janet Wilson
April 10, 2025
Is this model supplied with runners to slide oven into 600mm gap and secure to adjacent units? Or does it need a housing cabinet?
1 comments:
Mr. Anderson
April 10, 2025
The Hisense BID75211XUK model requires a standard 600mm wide housing cabinet with minimum internal dimensions as specified. It is not designed to slide directly into a 600mm gap without a housing unit.
This answer is automatically generated
linda delderfield
March 5, 2025
The old cooker is free standing, how can I make this model fit as is for built-in under
1 comments:
Mr. Anderson
March 5, 2025
The Hisense BID75211XUK is already a built-in double oven, not a freestanding cooker. To install it properly, secure the oven to the kitchen cabinet using two distance holders ("A") that fit into the holes in the oven frame, and then fix it with two screws ("B"). If telescopic runners are fitted, follow the installation steps:
1. Attach the rear clip at any position on the outer wire. 2. Tilt inward and push the telescopic runner so the rear clip locks into the horizontal wire. 3. Insert the front clip into the outer and inner wire. 4. Press down on the end of the telescopic runner to hook the front clip onto the inner down wire and ensure the boss is secured into the outer wire.
To remove the telescopic runners, press the front clip button, lift up, and pull back while pressing the button.
Need help?
Do you have a question about the BID75211XUK and is the answer not in the manual?
Questions and answers
Is this model supplied with runners to slide oven into 600mm gap and secure to adjacent units? Or does it need a housing cabinet?
The Hisense BID75211XUK model requires a standard 600mm wide housing cabinet with minimum internal dimensions as specified. It is not designed to slide directly into a 600mm gap without a housing unit.
This answer is automatically generated
The old cooker is free standing, how can I make this model fit as is for built-in under
The Hisense BID75211XUK is already a built-in double oven, not a freestanding cooker. To install it properly, secure the oven to the kitchen cabinet using two distance holders ("A") that fit into the holes in the oven frame, and then fix it with two screws ("B"). If telescopic runners are fitted, follow the installation steps:
1. Attach the rear clip at any position on the outer wire.
2. Tilt inward and push the telescopic runner so the rear clip locks into the horizontal wire.
3. Insert the front clip into the outer and inner wire.
4. Press down on the end of the telescopic runner to hook the front clip onto the inner down wire and ensure the boss is secured into the outer wire.
To remove the telescopic runners, press the front clip button, lift up, and pull back while pressing the button.
This answer is automatically generated