Table of Contents
Advertisement
Tools
Hanging the door panel
Cross-head
screwdriver
M4 hex key (1x)
1
13mm spanner (1x)
13mm socket wrench
2
DOOR PANEL INSTALLATION
Hold the door panel at an angle from
the top of the door and lower the screw
holes of the hanging bracket onto the
adjustment screws. .
Align the door panel straight with the
door and slide-in the side brackets to the
side screws of the door,
Tighten the side screws loosely to
temporarily secure the door panel.
3
Screw the M8 washer and nut to the
adjustment screw and loosely tighten.
For Refrigerator-Freezer
Repeat steps 1 – 3 for the top door and
drawer panels.
Use a 13mm socket wrench to tighten or
loosen the M8 nut in the drawer panel.
Illustrations may differ from your purchased appliance.
41
Advertisement
Table of Contents
