Install Door And Drawer Side Trims - Fisher & Paykel RS7621WR Installation Manual

Trims install kit
A
Top door panel side
extrusion (2)
front of door
Bottom drawer panel
side extrusion (2)
Bottom drawer
top trim (1)
Cabinet side trim (2)

INSTALL DOOR AND DRAWER SIDE TRIMS

D
b
c
Install door top extrusion
1 Align the top extrusion (A)
to the top of the door, and
match the notch (B) with the
magnet housing (C).
2 Clip the trim caps (D) at both
ends of top extrusion to both
ends of the top of the door.
e
3 Press the top extrusion down
to the door top surface. (E)
Install door side extrusions
f
1 Press the side trims (F) to fit
into the panel gaps on the right
and left sides of the door.
2 Align the top of the side trims
to fit with the right and left
ends of the top extrusion.
G
H
H
side trim
side view
Your columns Installation is now complete!
Install drawer top and side trims
1 Remove the adhesive
backing of adhesive strips
pre-attached to the underside
of the top trim (G).
2 Press down the top trim firmly
to engage the back surface of
the drawer panel.
Ensure the trim is fully seated
z
against the drawer top
surface.
3 Install the side trims (H) by
inserting into the panel gaps
on each side of the door.
Ensure the cabinet is
z
centreed to prevent the
side trims from interfering
with the cabinet.
57