Fisher & Paykel RS6121W Installation Manual page 26

Dimensions apply for the preparation and installation of Custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
The thickness of the custom door panel can vary provided that the screws do not penetrate beyond the full depth of the door panel.
203
33
61CM REFRIGERATOR-FREEZER
26
CUSTOM DOOR PANEL INSTALL DIMENSIONS
302
88
51
603 single install
605 dual install
TOP DOOR PANEL
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
Do not place pilot holes for
handle attachment in marked
areas to avoid clashing with
panel attachment brackets.
61CM REFRIGERATOR-FREEZER
302
203
83
33
51
603 single install
605 dual install
DRAWER PANEL
Cutouts in the hanging
bracket are applicable for
Fisher and Paykel handles only.
If locating a custom handle in
the shaded area shown above,
ensure handle screw heads are
countersunk into the back of the
door panel to avoid interference
with the hanging bracket.
Toe kick height 152mm
Toe kick height 102mm
Toe kick height 51mm