Table of Contents
Advertisement
Tools
Removing the hanging brackets
M8 hex key
13mm spanner
13mm socket wrench
1
2
APPLIANCE PREPARATION
M8 washer
M8 nut
Remove the M8 nut and M8
washer from the M8 screw at
the top of the door using the
supplied hex key and spanner.
Remove the hanging bracket
and set aside to use later.
3
3mm
4
Illustrations may differ from your purchased appliance.
Loosen the M8 screws
by 3mm.
M8 screw
For Refrigerator-Freezer:
Repeat steps 1 – 3 to remove
the bracket of the drawer. Use
a socket wrench to loosen the
M8 nut.
31
Advertisement
Table of Contents
