Fisher & Paykel RS6121W Installation Manual page 27

Dimensions apply for the preparation and installation of Custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
The thickness of the custom door panel can vary provided that the screws do not penetrate beyond the full depth of the door panel.
203
33
76CM REFRIGERATOR-FREEZER
CUSTOM DOOR PANEL INSTALL DIMENSIONS
378
88
51
756 single install
758 dual install
TOP DOOR PANEL
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
Ensure handle is mounted
65mm from edge of panel
to the centre — this will avoid
interference with bracket.
33
76CM REFRIGERATOR-FREEZER
378
203
83
51
756 single install
758 dual install
DRAWER PANEL
Cutouts in the hanging
bracket are applicable for
Fisher and Paykel handles only.
If locating a custom handle in
the shaded area shown above,
ensure handle screw heads are
countersunk into the back of the
door panel to avoid interference
with the hanging bracket.
Toe kick height 152mm
Toe kick height 102mm
Toe kick height 51mm
27