Toro Outcross 9060 Series Installation Instructions Manual page 15

12
Installing the Roof Panel
No Parts Required
Procedure
1. Lift the roof panel and align the holes on the
panel with the clip nuts in the roof-mount
channel.
2. Assemble the panel to the roof mount with the
6 flange-head bolts and 6 washers
that you removed in
(page 2).
Figure 22
1. Washer
2. Flange-head bolt
3. Torque the flange-head bolts to 1017 to 1243
N∙cm (90 to 110 in-lb).
13
Connecting the Battery
No Parts Required
Procedure
Connect the battery; refer to your machine Operator's
Manual.
(Figure
2 Removing the Roof Panel
3. Roof panel
4. Roof-mount channel
Operation
Controls
22)
Turn Signals
Press down on the switch
right turn signal.
Press up on the switch
turn signal.
Horn Button
Press the horn button
g254330
15
Figure 23
(Figure 23) to engage the
(Figure 23) to engage the left
(Figure 23) to activate the horn.
g267078