Toro Outcross 9060 Series Installation Instructions Manual page 14

10
Installing the Fuses
Parts needed for this procedure:
1 15A fuse
1 10A fuse
Procedure
Install the 15A fuse into the fuse block slot at column
B, row 4.
Install the 10A fuse into the fuse block slot at column
C, row 4.
11
Installing the Reflective Tape
Parts needed for this procedure:
2 Yellow reflective tape
4 Red reflective tape
Procedure
Install the reflective tape as shown in
Install the red reflective tape on both sides of the machine (Box B of
1. Red reflective tape
1. 15A fuse (B4)
Figure 21.
Figure 21
2. Yellow reflective tape
14
Figure 20
2. 10A fuse (C4)
Figure 21).
g274357
g264178