Toro Outcross 9060 Series Installation Instructions Manual page 8

1. Bolt (frame/bracket 5/16 x 2-3/4 inches)
2. Bracket (horn)
Connecting the Wire Harness to the Horn
Connect the terminal receptacles for the yellow and black wires onto the blade terminals of the horn
Note:
You can connect either wire to either blade terminal of the horn.
1. Terminal receptacle (yellow wire)
2. Terminal receptacle (black wire)
Figure 8
3. Flange locknut (5/16 inch)
Figure 9
3. Blade terminal (horn)
8
g254491
(Figure 9).
g254484