Scenes Properties; White The Memory - ProLights DC2064 User Manual

DC2064 - DC2164 - DC2264
34

8.2 SCENES PROPERTIES

You can change the scenes properties by clicking the icon on the top and on the right of the window or
click the Time function in the list of scenes or click on the properties icon if your scene is in the lower part
of the window. The properties window has 3 parts:
• GENERAL part, you can change the loop number and the type of jump of the scene. If you choose a
fixed number of loop you must say what could do the scene after having run all the loops.
• TRIGGER part, for HE10 port triggering with direct mechanical contacts.
• DATE and TIME part, for all the time triggering options and scenes schedule.
8.3 WRITE THE MEMORY
To add several scenes to the memory of the interface, you need to select the scenes and click on the IN-
SERT button or you can also drag and drop the selected scene to a free space of the down area (Memory
map). After you need to use the WRITE THE INTERFACE STAND ALONE MEMORY function.
When the memory has been optimized you can download the scene in the interface memory and test:
Click on the WRITE THE INTERFACE STAND ALONE MEMORY button and wait the end of the upload.
• Disconnect the interface.
• Power on the interface with a 9 Volts power supply.
• Put the switch button of the interface to the EXT position.