ProLights DIAMOND19TW User Manual

ProLights DIAMOND19TW User Manual

Led moving head
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

DIAMOND19TW
LED MOVING HEAD
USER MANUAL
MANUALE UTENTE
EN - IT

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIAMOND19TW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ProLights DIAMOND19TW

  • Page 1 DIAMOND19TW LED MOVING HEAD USER MANUAL MANUALE UTENTE EN - IT...
  • Page 2 All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be reproduced in any form or by any means for any commercial use. In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice.
  • Page 3: Table Of Contents

    3. 22 Special functions 4 Maintenance 4. 1 Maintenance and cleaning the unit 4. 2 Fuse replacement 4. 3 Trouble shooting • DIAMOND19TW Packing content • Mount bracket • Power supply cable and signal cable • Safety rope • User manual...
  • Page 4: General Instructions

    DIAMOND19TW WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY General instruction • The products referred to in this manual conform to the European Community Directives and are there- fore marked with .
  • Page 5: Introduction

    - 1 - INTRODUCTION 1.1 DESCRIPTION DIAMOND19TW is a tunable white version of the stunning DIAMOND19 delivering a consistent 2600K- 8000K output. The 6-66° zoom, even beam and precise colour calibration create a true workhorse fixture for an exhibition, corporate or broadcast environment.
  • Page 6 DIAMOND19TW • Operating temperature: -10° ~ +45° • Flicker: flicker free operation ELECTRICAL • Power supply: 100-240V – 50/60Hz • Power consumption (at 230V): 316W • Output (at 230V): 6 units on a single power line PHYSICAL • Cooling: combination of heat pipe cooling system and low noise fan •...
  • Page 7: Operating Elements And Connections

    DIAMOND19TW 1.3 OPERATING ELEMENTS AND CONNECTIONS 1. MOVING HEAD 2. ROTARY ARM 3. HANDLE 4. LED INDICATOR "WDMX" 5. MICROPHONE 6. CONTROL PANEL with LCD display and 5 button used to access the control panel functions and manage them. 7. DMX OUT ( 3-pole XLR): 1 = ground, 2 = DMX -, 3 = DMX + 8.
  • Page 8: Installation

    2.1 MOUNTING The DIAMOND19TW may be set up on a solid and even surface. By means of the fixing facilities of the baseplate, the unit can also be mounted upside down to a cross arm. The base plate is shown in fig.3. For fixing, stable mounting clips are required.
  • Page 9: Functions And Settings

    3.2 BASIC The DIAMOND19TW has a LCD display and 5 button used to access the control panel functions and man- age them (fig.4).
  • Page 10: Menu Structure

    DIAMOND19TW 3.3 MENU STRUCTURE MENU ð ð Connect DMX Address Value (1-512) ð Wireless DMX Value (1-512) ð ð Light Max Temperature Value (60°-130° C) ð ð Lamp Adjust Control Value (000-255) ð Value (000-255) ð Pan Fine Value (000-255) ð...
  • Page 11 DIAMOND19TW ð ð Reset Pan & Tilt Others ð ð Movement Pan Reverse ON/OFF ð Tilt Reverse ON/OFF ð Pan Degree 540/630 ð Encoders ON/OFF ð Pan/Tilt Mode Standard/Smooth ð ð UI Set Mic Sens. Value (00-99%) ð No Signal Close/Hold/Auto/Music ð...
  • Page 12: Slave Receive Mode

    DIAMOND19TW ð Program Reload ON/OFF ð Password 050 (insert to unlock the following settings) ð Private Reload ON/OFF ð All Reload ON/OFF ð ð Program Play DMX Receive ð Slave Receive Part 1 Receive/Part 2 Receive/Part 3 Receive ð Sequence Alone/Master ð...
  • Page 13: Operation In Automatic Mode

    Select the desired program on the master unit (described in section 3.5). Use the DMX connectors of the DIAMOND19TW and an XLR cable to form a chain of units. Under certain conditions and lengths you want to make a termination as shown on page 16.
  • Page 14: Scenes Record Mode

    • Press the LEFT button repeatedly to exit the menu and save changes. 3.6 SCENES RECORD MODE DIAMOND19TW is equipped with a built-in DMX recorder by which you can transmit the programmed scenes from your DMX-controller to the device. Proceed as follows to store the sequence of scenes in the unit.
  • Page 15: Sensitivity Microphone

    • Press the LEFT button repeatedly to exit the menu and save changes. 3.11 DMX CONFIGURATION The DIAMOND19TW has 5 DMX channel configurations which can be accessed from the control panel. • Press the ENTER button to access the main menu.
  • Page 16: Dmx Addressing

    DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel, adjust the start address 33 on the DIAMOND19TW. The other functions of the light effect panel are then automatically assigned to the following addresses.
  • Page 17: Connection Of The Dmx Line

    DIAMOND19TW 3.13 CONNECTION OF THE DMX LINE DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped- ance and low capacity. The following diagram shows the connection mode: DMX - INPUT DMX - OUTPUT XLR plug XLR socket...
  • Page 18: Dmx Control

    DIAMOND19TW 3.15 DMX CONTROL STAND EXT-1 BAS-8 BAS-16 FUNCTION Value 13 Ch 20 Ch 12 Ch 14 Ch 0~100% 000 - 255 PAN FINE 0~100% 000 - 255 TILT 0~100% 000 - 255 TILT FINE 0~100% 000 - 255 MOVEMENT SPEED...
  • Page 19 DIAMOND19TW STAND EXT-1 BAS-8 BAS-16 FUNCTION Value 13 Ch 20 Ch 12 Ch 14 Ch No function (shutter open) 096 - 127 Pulse-effect in sequences 128 - 159 No function (shutter open) 160 - 191 Random strobe effect slow to fast...
  • Page 20 DIAMOND19TW STAND EXT-1 BAS-8 BAS-16 FUNCTION Value 13 Ch 20 Ch 12 Ch 14 Ch Cool White 003 - 004 Warm White->Cool White 005 - 255 WARM WHITE-ALL WarmWhite 0 -> 100% 000 - 255 COOL WHITE-ALL Cool White 0 -> 100%...
  • Page 21: Wireless Control Settings

    DIAMOND19TW 3.16 WIRELESS CONTROL SETTINGS To enable wireless control mode, proceed as follows: • Press the ENTER button to access the main menu. • Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to enter the next menu.
  • Page 22: Display Settings

    - Bright Display - Backlight Brightness. Use the arrow buttons to select a value from 0-31. - Brand Show - Displaying the brand. This function allows you to show the brand “PROLIGHTS” on the display. Select ON to activate or OFF to disable.
  • Page 23: Reset Functions

    • Press the ENTER button to confirm your choice and wait for the recovery of the selected function. 3.22 SPECIAL FUNCTIONS For the DIAMOND19TW you can access the following special functions: No Signal Select this feature to set the preferred mode of operation to be activated in case the drive is not present no DMX signal input: •...
  • Page 24 DIAMOND19TW choice. Press the LEFT button repeatedly to exit the menu and save changes. Theater Mode Select this function if you want less noise from the machine; the LED output will be limited to decrease the heating and fan speed: •...
  • Page 25 DIAMOND19TW • Press the ENTER button to access the main menu. • Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter the next menu. • Press the UP/DOWN button to scroll through the menu, and then select the Fixture ID and press the ENTER button to enter the next menu.
  • Page 26: Maintenance

    DIAMOND19TW - 4 - MAINTENANCE 4.1 MAINTENANCE AND CLEANING THE UNIT • Make sure the area below the installation place is free from unwanted persons during setup. • Switch off the unit, unplug the main cable and wait until the unit has cooled down.
  • Page 27: Troubleshooting

    DIAMOND19TW 4.3 TROUBLESHOOTING Problems Possible causes Checks and remedies No mains supply Check the power supply voltage • • Dimmer fader set to 0 Increase the value of the dimmer channels • • All color faders set to 0 Increase the value of the color channels •...
  • Page 28 Music & Lights S.r.l. si riserva ogni diritto di elaborazione in qualsiasi forma delle presenti istruzioni per l’uso. La riproduzione - anche parziale - per propri scopi commerciali è vietata. Al fine di migliorare la qualità dei prodotti, la Music&Lights S.r.l. si riserva la facoltà di modificare, in qualunque momento e senza preavviso, le specifiche menzionate nel presente manuale di istruzioni.
  • Page 29 3. 22 Funzioni speciali 4 Manutenzione 4. 1 Manutenzione e pulizia del sistema ottico 4. 2 Sostituzione fusibile 4. 3 Risoluzione dei problemi • DIAMOND19TW Contenuto dell'imballo: • Staffa di fissaggio • Cavo di segnale e alimentazione • Cavo di sicurezza...
  • Page 30: Avvertenze Generali

    DIAMOND19TW ATTENZIONE! Prima di effettuare qualsiasi operazione con l’unità, leggere con attenzione questo manuale e conservarlo accuratamente per riferimenti futuri. Contiene informazioni importanti riguardo l’installazione, l’uso e la manutenzione dell’unità. SICUREZZA Avvertenze generali • I prodotti a cui questo manuale si riferisce sono conformi alle Direttive della Comunità Europea e per- tanto recano la sigla .
  • Page 31: Introduzione

    - 1 - INTRODUZIONE 1.1 DESCRIZIONE DIAMOND19TW è la versione tunable white dello straordinario DIAMOND19 con un output da 2600- 8000K. Lo zoom 6-66° e la precisa calibrazione colore, creano un vero e proprio cavallo di battaglia per esibizioni, aziende e televisioni 1.2 SPECIFICHE TECNICHE...
  • Page 32 DIAMOND19TW • Temperatura d’esercizio: -10° ~ +45° • Flicker: funzionamento senza sfarfallio ALIMENTAZIONE • Alimentazione elettrica: 100-240V – 50/60Hz • Potenza assorbita (a 230V): 316W • Output (a 230V): 6 unità connesse in serie CARATTERISTICHE FISICHE • Raffreddamento: sistema di dissipazione a con heating-pipe •...
  • Page 33: Elementi Di Comando E Di Collegamento

    DIAMOND19TW 1.3 ELEMENTI DI COMANDO E DI COLLEGAMENTO 1. TESTA MOBILE 2. BRACCIO GIREVOLE 3. MANIGLIA PER TRASPORTO 4. INDICATORE LED "WDMX" 5. MICROFONO 6. PANNELLO DI CONTROLLO con display LCD e 5 pulsanti per l'accesso e gestione delle diverse funzioni.
  • Page 34: Installazione

    - 2 - INSTALLAZIONE 2.1 MONTAGGIO Il DIAMOND19TW può essere collocato su un piano solido. Inoltre, grazie ai fori di fissaggio, l’unità può es- sere montata anche a testa in giù, su una traversa (fig.3). Per il fissaggio occorrono dei supporti robusti per il montaggio.
  • Page 35: Funzioni E Impostazioni

    Per maggiore comodità è consigliabile collegare l’unità con una presa comandata da un interruttore. 3.2 IMPOSTAZIONE BASE Il DIAMOND19TW dispone di un display LCD e di 5 pulsanti per l’accesso alle funzioni del pannello di con- trollo e la loro gestione (fig.4).
  • Page 36: Struttura Menu

    DIAMOND19TW 3.3 STRUTTURA MENU MENU ð ð Connect DMX Address Value (1-512) ð Wireless DMX Value (1-512) ð ð Light Max Temperature Value (60°-130° C) ð ð Lamp Adjust Control Value (000-255) ð Value (000-255) ð Pan Fine Value (000-255) ð...
  • Page 37 DIAMOND19TW ð ð Reset Pan & Tilt Others ð ð Movement Pan Reverse ON/OFF ð Tilt Reverse ON/OFF ð Pan Degree 540/630 ð Encoders ON/OFF ð Pan/Tilt Mode Standard/Smooth ð ð UI Set Mic Sens. Value (00-99%) ð No Signal Close/Hold/Auto/Music ð...
  • Page 38: Modalità Slave Receive

    Sull’unità master selezionare il programma desiderato come indicato al paragrafo 3.5. Servirsi dei connettori DMX del DIAMOND19TW e di un cavo XLR per formare una catena di unità. In certe condizioni e lunghezze si consiglia di effettuare una terminazione come mostrato a pagina 18.
  • Page 39: Operazioni In Modalità Automatica

    DIAMOND19TW 3.5 OPERAZIONI IN MODALITÀ AUTOMATICA L’unità può svolgere il suo programma Show autonomamente. Prima di inviare un programma automatico in esecuzione è necessario impostare l’unità come Master/Alone: • Premere il tasto ENTER per accedere al menu principale. • Premere il tasto UP/DOWN per scorrere nel menu, selezionare l’icona Program, quindi premere il tasto ENTER per accedere al menu successivo Play.
  • Page 40: Modalità Scenes Records

    • Premere il tasto LEFT più volte per uscire dal menu e per salvare le modifiche apportate. 3.6 MODALITÀ SCENES RECORD DIAMOND19TW è dotato di un registratore DMX integrato attraverso il quale è possibile trasmettere, dal vostro Controller DMX al dispositivo, le scene programmate. Procedere come segue per memorizzare la sequenza di scene da mandare in esecuzione.
  • Page 41: Collegamento

    • Premere il tasto LEFT più volte per uscire dal menu e per salvare le modifiche apportate. 3.11 CONFIGURAZIONI CANALI DMX DIAMOND19TW dispone di 4 configurazioni dei canali DMX a cui si può accedere dal pannello di controllo. • Premere il tasto ENTER per accedere al menu principale.
  • Page 42 DIAMOND19TW Se, per esempio, sull’unità di comando è previsto l’indirizzo 33 per comandare la funzione del primo canale DMX, si deve impostare sul DIAMOND19TW l’indirizzo di start 33. Le altre funzioni del pannello saranno assegnate automaticamente agli indirizzi successivi. Segue un esempio con indirizzo 33 di start:...
  • Page 43: Collegamenti Della Linea Dmx

    DIAMOND19TW 3.13 COLLEGAMENTI DELLA LINEA DMX La connessione DMX è realizzata con connettori standard XLR. Utilizzare cavi schermati, 2 poli ritorti, con impedenza 120Ω e bassa capacità. Per il collegamento fare riferimento allo schema di connessione riportato di seguito: DMX - INPUT...
  • Page 44: Canali Dmx

    DIAMOND19TW 3.15 CANALI DMX STAND EXT-1 BAS-8 BAS-16 FUNCTION Value 13 Ch 20 Ch 12 Ch 14 Ch 0~100% 000 - 255 PAN FINE 0~100% 000 - 255 TILT 0~100% 000 - 255 TILT FINE 0~100% 000 - 255 MOVEMENT SPEED...
  • Page 45 DIAMOND19TW STAND EXT-1 BAS-8 BAS-16 FUNCTION Value 13 Ch 20 Ch 12 Ch 14 Ch No function (shutter open) 096 - 127 Pulse-effect in sequences 128 - 159 No function (shutter open) 160 - 191 Random strobe effect slow to fast...
  • Page 46 DIAMOND19TW STAND EXT-1 BAS-8 BAS-16 FUNCTION Value 13 Ch 20 Ch 12 Ch 14 Ch Cool White 003 - 004 Warm White->Cool White 005 - 255 WARM WHITE-ALL WarmWhite 0 -> 100% 000 - 255 COOL WHITE-ALL Cool White 0 -> 100%...
  • Page 47: Impostazione Controllo Wireless

    DIAMOND19TW 3.16 IMPOSTAZIONE CONTROLLO WIRELESS Per abilitare la modalità di controllo wireless procedere nel seguente modo: • Premere il tasto ENTER per accedere al menu principale. • Premere il tasto UP/DOWN per scorrere nel menu, selezionare l’icona Connect, quindi premere il tasto ENTER per accedere al menu successivo.
  • Page 48: Impostazioni Display

    - Brand Show - Visualizzazione del brand. Questa funzione permette di scegliere se visualizzare o meno il brand “PROLIGHTS” sul display: ON per attivare la funzione oppure OFF per disattivarla. - Key lock - Blocco tasti. Con questa funzione è possibile bloccare i tasti del pannello di controllo, per evitare, ad esempio, manomissioni delle impostazioni.
  • Page 49: Reset Delle Funzioni

    • Premere il tasto ENTER per confermare la scelta ed attendere il ripristino della funzione selezionata. 3.22 FUNZIONI SPECIALI Per DIAMOND19TW è possibile accedere alle seguenti funzioni speciali: No Signal Selezionare questa funzione per impostare la modalità di funzionamento preferita da attivare nel caso in cui nell’unità...
  • Page 50 • Premere il tasto LEFT più volte per uscire dal menu e per salvare le modifiche apportate. Fixture ID e RDM DIAMOND19TW possiede la funzione di RDM (Remote Device Management) che rende possibile il con- trollo remoto di dispositivi connessi via DMX. Con questa funzione è possibile richiamare i vari sottomenu dell’unità.
  • Page 51 DIAMOND19TW • Premere il tasto ENTER per accedere al menu principale. • Premere il tasto UP/DOWN per scorrere nel menu, selezionare l’icona Set, quindi premere il tasto ENTER per accedere al menu successivo. • Premere il tasto UP/DOWN per selezionare Fixture ID e premere il tasto ENTER per accedere al menu successivo.
  • Page 52: Manutenzione

    DIAMOND19TW - 4 - MANUTENZIONE 4.1 MANUTENZIONE E PULIZIA DEL SISTEMA OTTICO • Durante gli interventi, assicurarsi che l’area sotto il luogo di installazione sia libera da personale non qualificato. • Spegnere l’unità, scollegare il cavo di alimentazione ed aspettare finché l’unità non si sia raffreddata.
  • Page 53: Risoluzione Dei Problemi

    DIAMOND19TW 4.3 RISOLUZIONE DEI PROBLEMI Anomalie Possibili cause Controlli e rimedi Mancanza di alimentazione di rete Verificare la presenza della tensione alimentazione • • Dimmer impostato a 0 Incrementare i valori del canale dimmer • • Tutti i colori impostati a 0...
  • Page 54 Note...
  • Page 55 Note...
  • Page 56 MUSIC & LIGHTS S.r.l. - Phone +39 0771 72190 - www.musiclights.it...

Table of Contents