Set-Up Mode; Create A New Project; Insert And Delete Fixtures - ProLights DC2064 User Manual

DC2064 - DC2164 - DC2264
8

- 3 - SET-UP MODE

The Set-up page allows configuring the software and using the lights required for a show. You can choose
and update from over 4,000 different fixtures, allocate a DMX address from a range of 512 on 6 different
DMX universes, activate or de-activate a fade-effect or invert the fixture movements.
You can also test the fixture to check if it works correctly, it is the basics for a good functioning. The soft-
ware uses the SSL libraries, which is currently the best choice you can make and a guarantee of evolution
over the next few years.
The Scan Library editor allows you to create your own library in few minutes.

3.1 CREATE A NEW PROJECT

For your first use we advise to create a new project. Select the NEW option or click on this icon to CREATE
a new project in the FILE menu, at the end save your project.

3.2 INSERT AND DELETE FIXTURES

For the best control use a fixture library. The software will create powerful control functions corresponding
to the fixture functions. Click on the PATCH FIXTURE button to insert fixtures from the library.
Then you will be able to select the library you require from the PATCH MANAGER window displayed. For
traditional lighting, you need to select a file from the "_Generic" folder. After selecting your fixture, a mes-
sage box will appear and prompt you to enter some data:
• DMX Universe.