30
- 7 - SOFTWARE MENUS
On the top and on the left of the screen, the software gives you some useful and important functions.
7.1 FILE MENU
• NEW, to create a new empty project.
• OPEN, to open an old project.
• SAVE, to save your work in the current project file.
• SAVE AS, to save your project on a new DVC file.
• EXIT, to close the software, do not forget to save your project before.
7.2 WINDOWS MENU
• LIVE, to put the software under live mode only. The user cannot access to other mode (Editor and Set-
up) and cannot change the content of the scenes of the project. The software secure the project and
the user can only trigger the scenes, trigger the effect buttons and take control of the fixture.
• RESET POSITIONS, to put the position of the control windows to their default position in cursor or pre-
set pallet mode.
7.3 EFFECT MENU
This menu can be used only in Live mode.
• NEW EFFECT, to add an effect button on the screen, a pop-up window appears.
• DELETE EFFECTS, to remove the effect button of the project.
• EDIT EFFECTS, to change the DMX content and the parameters of the effect button. A pop-up appears.
7.4 TOOLS MENU
• STAND ALONE, the stand alone mode window opens up and it is possible to transfer here the scenes
previously created in the DMX interface memory. In the window, the scenes and options will be dis-
played only if a stand alone interface is connected
DC2064 - DC2164 - DC2264