Option Menu - ProLights DC2064 User Manual

• INTERFACE, to display the interface management window (Hardware explorer) and configure the dif-
ferent interfaces connected to the computer. You can change the signal (Input or Output) for each
interface and manage the DMX universes.
• SCENE GENERATOR, to access to the automatic scenes generator. This powerful function will allow you
to create a complex scene in short time.
• IMPORT SCENES, to add to the current project some scenes from another project file(.DLM or .DVC).
The scenes and steps will be added automatically to the list and they will respect the DMX values and
DMX channels of the other project. Then you can use the Patch manager to change the DMX address of
the fixtures and the content of the scenes.
• SOFTWARE COMMANDS, to display the Command Manager. You can assign some midi values and port
values to some important functions of the software. The most frequently used functions could be used
quickly.

7.5 OPTION MENU

• DISABLE THE MOVING FADERS, By default this option is not activated. The faders of the control win-
dows will move with the DMX levels of each channel. Enable this function could affect the computer
performances.
• LIGHT BEAM ON, Activated by default. When you create a new scene, all the fixtures selected in the
group window will be set-up in their CENTRE position with their beam OPEN. You can see if the DMX
line works fine. This option uses the libraries. A good library will set-up the lights automatically and you
will save some time while programming. Disable this function and all the new scenes will have all the
channels to Zero DMX values. You will need to turn on each light for your programming.
• DMX INPUT, you will activate or not the DMX input functions.
• ENABLE MIDI INPUT, you activate or not all the MIDI functions of the software
• SELECT FIXTURES TO CONTROL, with a MIDI or DMX IN control, only the item selected in the group
window will be under control. The channels of all the fixtures must be previously set-up under the MIDI
or DMX IN mode. If the function is disabled, only the channels previously set-up under MIDI or DMX In
mode could be controlled and the channels will not consider the selected item.
• AUTO SAVE, You save the current show every minute.
• START THE 3D VISUALIZATION, the software will automatically start the 3D view each time you start the
software.
• START THE AUDIO ANALYSIS, this tool is to calculate the Bit Per Minutes of an audio file. Each scene has
a BPM function.
DC2064 - DC2164 - DC2264
31