Table of Contents
Advertisement
Note
f The optional NFC Upgrade Kit (Model No.: ET-NUK10) can be used to enable the NFC function of the projector. Note that there are some
models that have the NFC function enabled from the time of factory shipment, and there are some countries or regions where the NFC
Upgrade Kit cannot be applied.
For the availability of the NFC function in the country or region where you purchased the product, visit the following website or consult your
dealer.
https://panasonic.net/cns/projector/
f For the connection using the NFC function, use the application software "Smart Projector Control" which performs the setting and
adjustment of the projector.
For details of the "Smart Projector Control", visit the following website.
https://panasonic.net/cns/projector/
r Control panel
1
<POWER ON> button
Sets the projector to projection mode when the <MAIN
POWER> switch on the projector is set to <ON> and the power
is turned off (standby mode).
2
<STANDBY> button
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
3
<MENU> button
Displays or hides the main menu. (x page 88)
Returns to the previous menu when a sub-menu is displayed.
If you press the <MENU> button on the control panel for at least
three seconds while the on-screen display is off (hidden), the
on-screen display is turned on.
4
<ENTER> button
Determines and executes an item in the menu screen.
36 - ENGLISH
Chapter 1 Preparation — About your projector
1
2
3
4
5
6
7
8
9
10
5
asqw buttons
Used to select items in the menu screen, change settings, and
adjust levels.
Also used to enter a password in [SECURITY] or enter
characters.
6
<ON SCREEN> button
Switches the on-screen display function on (display) or off
(hide). (x page 84)
7
Input selection buttons (<HDMI 1/2>, <DISPLAYPORT>,
<SLOT>)
Switches the input signal to project. (x page 77)
<SLOT> button can be used when the Function Board is
installed in the slot on the projector.
8
<INPUT MENU> button
Displays the input selection screen. (x page 78)
9
<LENS> button
Adjusts the focus, zoom, and lens shift.
10 <SHUTTER> button
Used to temporarily turn off the image. (x page 84)
Advertisement
Table of Contents
