Table of Contents
Advertisement
Installing the certificate
Install the server certificate and the intermediate certificate issued by the certification organization into the
projector.
1)
Click [Certificate] → [Server Certificate install] → [Choose File].
f A dialog to select the file is displayed.
2)
Select the server certificate file and click [Open].
f If the intermediate certificate is issued from the certification organization together with the server certificate,
proceed to Step 3).
f If only the server certificate is issued from the certification organization, proceed to Step 5).
3)
Click [Choose File] in [Intermediate Certificate install].
f A dialog to select the file is displayed.
4)
Select the intermediate certificate file and click [Open].
5)
Click [Execute].
f The server certificate and the intermediate certificate are installed into the projector.
6)
Click [OK].
Note
f To confirm the information of the installed server certificate, refer to "Confirming the information of the server certificate" (x page 234).
Confirming the information of the server certificate
Confirm the information of the server certificate installed in the projector.
1)
Click [Certificate] → [Server Certificate] → [Information] → [Confirm].
f The information of the installed server certificate is displayed. The details of each item are as follows.
Item
[Common Name]
[Country]
[State]
[Locality]
[Organization]
[Organization Unit]
[Not Before]
[Not After]
[CRT key]
Note
f The installed server certificate and the intermediate certificate can be deleted by clicking [Certificate] → [Server Certificate] → [Delete].
However, it cannot be deleted when [HTTPS set up] → [Connection] is set to [HTTPS]. Delete it after changing the setting to perform the
HTTP communication.
To delete the server certificate within the valid period, confirm that the certificate file used for installing is available on hand. It will be
necessary when installing the server certificate again.
234 - ENGLISH
Chapter 5 Operations — Using the web control function
The projector name or the IP address is displayed.
The country code defined in ISO 3166-1 alpha-2 (two upper case alphabets) is displayed.
The State, etc. is displayed.
The locality is displayed.
The organization name is displayed.
The organization unit name is not displayed. It is displayed as an asterisk.
Displays the date and time that the self-signed certificate was issued.
Displays the date and time that the self-signed certificate will expire.
[RSA key size]
[Last modified]
Details
The key length of the CRT key is displayed.
The generation date and time of the CRT key is displayed.
Advertisement
Table of Contents
