Table of Contents
Advertisement
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[ALL]
[1] - [255]
Note
f [LENS ID] will not return to the factory default setting even when initialized by any of the following methods.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g When initialized by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
Setting name to the projection lens
A name for identifying individual projection lens can be written into the EEPROM built in the projection lens. Set
the name if required.
1)
Press as to select [LENS].
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
3)
Press as to select [LENS INFORMATION SETTING].
4)
Press the <ENTER> button.
f The [LENS INFORMATION SETTING] screen is displayed.
5)
Press as to select [LENS NAME].
6)
Press the <ENTER> button.
f The [LENS NAME INPUT] screen is displayed.
7)
Press asqw to select the character, and press the <ENTER> button to enter the character.
8)
Press asqw to select [OK], and press the <ENTER> button.
f Name of the projection lens is changed.
Note
f Factory default name is [LENS01].
f [LENS NAME] will not return to the factory default setting even when initialized by any of the following methods.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g When initialized by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
[LENS MEMORY]
The adjusted lens position (vertical position, horizontal position, focus position, periphery focus position and zoom
position) can be saved and loaded.
Saving lens position
1)
Press as to select [LENS].
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
3)
Press as to select [LENS MEMORY].
4)
Press the <ENTER> button.
f The [LENS MEMORY] screen is displayed.
5)
Press as to select [LENS MEMORY SAVE].
6)
Press the <ENTER> button.
f The [LENS MEMORY SAVE] screen is displayed.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Select this item when the ID number is not to be specified.
Select this item when the ID number is to be set.
ENGLISH - 147
Advertisement
Table of Contents
