Features And Benefits Of Your Redback System - Redback SH5000 Owner's Manual

Features and benefits of your Redback system

SYSTEM FEATURE
Internet connected
MYRedback app and
Redback portal
All-in-one design
Status panel
EMS
Switchgear hatch
Low maintenance
Supports multiple batteries
Backup functionality
Relay control
Grid power quality
monitoring
Internal overload protection
Battery Management
System
Critical setting protection
Solar array ground fault and
insulation monitoring
BENEFIT
Inverter monitoring and management using the
MYRedback app or Redback portal.
Remote viewing of inverter status.
Monitor your home energy performance in real time,
including up to 3-phases of grid consumption, using
high quality, detailed charts.
See your true usage patterns and tune your energy
consumption, storage, export, and backup plan
accordingly.
Share system access with family, tenants etc.
Neat appearance; Easy to keep clean.
Colour coded LEDs to aid diagnostics.
The Energy Management System (EMS) is the inverter's
internal Control Board.
Convenient control of solar and battery connections.
Ability to bypass inverter backup without affecting
house or backup circuits.
EMS LEDs aid diagnostics.
Homeowners can complete essential annual
maintenance. A service call is not required.
Improved management and consumption of self-
generated energy. Start small, then extend the storage
capacity to suit your actual usage patterns.
Some devices remain available during a grid outage if
solar power or battery are available.
Up to four relay-switched house circuits or devices can
be timer controlled using the Redback app or portal.
The inverter can self-protect from poor quality grid
power and recover when quality improves.
The inverter will self-protect if it detects excessive heat
or excessive internal currents.
Batteries self-monitor to manage heat, State of Charge
(SoC), and charge and discharge rates, to extend
battery life.
Critical system settings may only be changed by
electrically qualified personnel.
Electrical safety for all parts of your system.
REQUIREMENT
Permanent internet connection
using your Wi-Fi or ethernet based
home network.
Permanent internet connection
using your Wi-Fi or ethernet based
home network.
Internet connection for occasional
software updates.
Basic mechanical skills and tools.
Ask your installer for advice on
upgrading your system storage.
Optional backup circuit required
and active; Battery is required.
Relay connected circuits.
#3 and #4 relays are optional
extras.
Owner's Guide – Redback Smart Hy brid System - v3.8
Redback Technolo gies
7