Maintenance; Schedule - Redback SH5000 Owner's Manual

Maintenance

Maintenance
13.1

Schedule

WARNING: ELECTROCUTION HAZARD. Lethal voltages may be present. Isolate all sources of power and test
before removing covers.
Your Redback SH5000 is a low maintenance product. You can undertake the minor annual maintenance identified below.
Internal maintenance must be conducted by a qualified person, such as your installer.
Note: Filters, fans and heatsink fins may require more frequent cleaning in dusty conditions.
ITEM NAME
1 Battery
Enclosure
vents, filters,
and fan blades.
2 Cabinet
3 Inverter
heatsink fins
4 Battery
connections
5 Cabinet seals
6 Cable seals
30
Owner's Guide – Redback Smart Hy brid System – v3.8
REASON
Airflow is reduced when dust
accumulates on the vents or the
filter is clogged.
The lower intake vents are more
likely to be affected.
Cabinet may become soiled.
Cooling efficiency reduces when
dust, dirt or debris accumulate on
the heatsink.
Battery efficiency may reduce if
connections or terminals become
dirty or corroded.
Concealed seals ensure cabinet
water resistance.
Cable seals prevent water and
insects entering the inverter.
PROCEDURE
See section 13.2.
Wipe down outside of cabinet with a
just-damp cloth. Immediately wipe
dry with a microfibre cloth.
Do not use cleaning agents as they
may damage the finish.
Clean the heatsink fins using a small
brush, cloth or compressed air.
Unplug and inspect battery cable
connections. Remove corrosion or
debris. Spray with contact cleaner.
Remove covers and inspect seals for
hardening, tears or other damage.
Look for signs of water in cabinets.
Remove BoS Front Cover and tighten
all cable glands and waterproof caps.
BY SERVICE BY
PERSON OWNER
 
 
 
 
 
 