Features And Benefits Of Your Redback System - Redback ST10000 Owner's Manual

Features and benefits of your Redback system

System feature
Internet connected
MYRedback app and the
Redback portal
All-in-one design
Status Panel
EMS
Switchgear panel
Low maintenance
Supports multiple battery
enclosures
Backup functionality
Relay control
Grid power quality
monitoring
Internal overload protection
Battery Management
System
Critical setting protection
Solar array ground fault and
insulation monitoring
Benefit
Inverter monitoring and management using the
MYRedback app or the Redback portal.
Remote viewing of Inverter status.
Monitor your home energy performance in real time,
including up to 3-phases of grid consumption, using
high quality, detailed charts.
See your true usage patterns for ways to further reduce
your electricity bill.
Share system access with family, tenants etc.
Neat appearance; Easy to keep clean.
Colour coded LEDs to aid diagnostics.
The Redback Energy Management System (EMS) is the
inverter's internal Control Board.
Convenient control of solar and battery connections.
Ability to bypass inverter backup without affecting
house or backup circuit.
Homeowner can complete essential annual
maintenance. Service person is not usually required.
Improved management and consumption of self-
generated energy. Extend the storage capacity to suit
your actual usage patterns.
Some devices remain available during a grid outage if
batteries have charge.
Up to three relay-switched house circuits or devices can
be timer controlled using the MYRedback app or portal.
Inverter can self-protect from poor quality grid power
and recover when quality improves.
The inverter will self-protect if it detects excessive heat
or excessive internal currents.
Batteries self-monitor to manage heat and State of
Charge (SoC) to extend battery life.
Critical system settings may only be changed by
electrically qualified personnel.
Electrical safety for all parts of your system.
Requirement
Permanent internet connection
using your Wi-Fi or ethernet based
home network.
Permanent internet connection
using your Wi-Fi or ethernet based
home network.
Internet connection for occasional
software updates.
Basic mechanical skills and tools.
Ask your installer for advice on
upgrading your system storage.
Optional backup circuit required
and active; battery required.
Requires optional relays and relay-
controlled circuits.
Owner's Guide – Redback ST10000 and BE14 000-HV - v1.6
Redback Technolo gies
7