Batteries And Battery Enclosure - Redback SH5000 Owner's Manual

Smart hybrid system
Hide thumbs Also See for SH5000:
Table of Contents

Advertisement

Introductio n
6.5

Batteries and Battery Enclosure

Your Redback system has a storage capacity of up to 23.6kWh using one or two
BE13200 enclosures and up to 28kWh using BE14000 enclosures. Each enclosure holds
up to four batteries—depending on battery model—and a second enclosure is always
required for five or more batteries.
The allowable battery combinations and resultant storage capacity is shown below (in KWh).
0
1
Number of
2
4.80
US2000
X
3
7.20 10.75 14.30 17.85 21.40 7.20 10.75 14.30 17.85 21.40 24.95
batteries @
2.4kWh each
4
9.60 13.15 16.70 20.25 23.80 9.60 13.15 16.70 20.25 23.80
(5 or more
5
12.00 15.55 19.10 22.65
require two
6
14.40 17.95 21.50
enclosures)
7
16.80 20.35
8
19.20
Usable capacity is typically 90% of total capacity Battery installations must include a minimum of two batteries of any listed model
Insufficient space in enclosure for this combination.
Pylontech batteries use an integrated Battery Management System (BMS) to manage ultimate charge and discharge rates
(protecting the batteries from heat damage) and inform the Smart Hybrid System of status. The BMS also protects the batteries
from total discharge, assisting system reliability and longevity.
Your installer may identify batteries as Master, 1, 2, 3 etc up to 8. This refers to the position of individual batteries in the BMS
chain of command, where the first connected battery is the Master, which controls subsequent batteries.
The battery identity may also indicate the physical position of the battery within the enclosure, though this is an installer
preference. The diagram below indicates the BMS battery naming convention and recommended battery locations.
TWO BATTERIES
*Only one US3000 per shelf in BE13200. **Any combination of US2000, US2000 Plus, US3000 permitted in BE14000. ***If used, one of the
US3000 batteries must be the Master battery, in the 1
10
Owner's Guide – Redback Smart Hy brid System – v3.8
Using BE13200s
0
1
2
3
0
7.10
10.65 14.20
5.95
9.50
13.05 16.60
8.35 11.90 15.45 19.00 4.80
Pylontech US2000 or US2000Plus
X
THREE BATTERIES*
enclosure.
st
Number of US3000 batteries @3.55kWh each
4
0
1
2
0
7.10 10.65 14.20 17.75 21.30 24.85 28.40
5.95 9.50 13.05 16.60 20.15 23.70 27.25
8.35 11.90 15.45 19.00 22.55 26.10
12.00 15.55 19.10 22.65
14.40 17.95 21.50
16.80 20.3
19.20
FOUR BATTERIES*
NOTE: US3000C batteries
are not supported.
Using BE14000 Enclosures
3
4
5
5
TO 8
TH
6
7
8
BATTERIES*
TH

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Be13200Be14000

Table of Contents