Preface; Definitions - Emerson Rosemount Analytical Oxymitter 4000 Instruction Manual

Hazardous Area Oxymitter 4000
The purpose of this manual is to provide information concerning the components, func-
tions, installation and maintenance of the Oxymitter 4000 Hazardous Area Oxygen
Transmitter.
Some sections may describe equipment not used in your configuration. The user should
become thoroughly familiar with the operation of this module before operating it. Read
this instruction manual completely.
The following definitions apply to WARNINGS, CAUTIONS, and NOTES found throughout this
publication.
Highlights an operation or maintenance
procedure, practice, condition, state-
ment, etc. If not strictly observed, could
result in injury, death, or long-term
health hazards of personnel.
: EARTH (GROUND) TERMINAL
: PROTECTIVE CONDUCTOR TERMINAL
: RISK OF ELECTRICAL SHOCK
: WARNING: REFER TO INSTRUCTION BULLETIN
The number in the lower right corner of each illustration in this publication is a manual illus-
tration number. It is not a part number, and is not related to the illustration in any technical
manner.
Rosemount Analytical Inc. A Division of Emerson Process Management

PREFACE

DEFINITIONS

Highlights an essential operating procedure,
condition, or statement.
NOTE TO USERS
Highlights an operation or maintenance
procedure, practice, condition, state-
ment, etc. If not strictly observed, could
result in damage to or destruction of
equipment, or loss of effectiveness.
NOTE
Instruction Manual
IB-106-340C Rev. 4.1
July 2004
P-1