Usb Configuration; Network Stack Configuration - DFI CMS100 User Manual

Advanced
X

USB Configuration

Legacy USB Support
• Enabled Enable Legacy USB support.
• Disabled Keep USB devices available only for EFI applications.
• Auto Disable Legacy support if no USB devices are connected.
XHCI Hand-off
Enable or disable XHCI Hand-off.
USB Mass Storage Driver Support
Enable or disable USB Mass Storage Driver Support.
Port 60/64 Emulation
Enables I/0 port 60h/64h emulation support. This should be enabled for the complete USB
keyboard legacy support for non-USB aware Oses.
User's Manual | CMS100
Advanced
X

Network Stack Configuration

Network Stack
Enable or disable UEFI network stack. The following fields will appear when this field is
en-abled.
Ipv4 PXE Support
Enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be
avail-able.
Ipv6 PXE Support
Enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be
avail-able.
PXE boot wait time
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or
numeric keys to set the value.
Media detect count
Set the number of times the presence of media will be checked. Use either +/- or numeric
keys to set the value.
Chapter 3
BIOS SETTINGS
31