Updating The Receiver Firmware - Marport PRO M6 Service Manual

The system reboots.
4. After the system has rebooted, refresh the web page.
5. Again, click Settings and from ZOB Upgrade, add the second license file.
The M6 system reboots again. Restart the Mx computer.
The message on the top of the page indicates the number of PRP (100) and NBTE (10)
sensors that can be added to the system and if a TE SC sensor can be added.

Updating the Receiver Firmware

This procedure applies only to technicians from Marport offices. You can update the
firmware when new versions of Mx firmware are available.
Important: It is necessary to update the receiver firmware because latest
versions fix issues and add new functionalities to the system.
Important: M6 system with Mx computer:
• Compatible application firmware : M4-F604-06.00.15 and later
• DO NOT INSTALL application firmware lower than version M4-
F604-06.00.15.
• DO NOT INSTALL system firmware patches or you will need to format
the Mx computer (on page 61) again.
1. From a web browser, go to Marport Authorized Service Provider (MASP) website:
https://asp.marport.fr/.
2. Go to the system page, then in the tree view click M6.
M6 PRO | V7 | Installation
86