Powering The Mx Computer - Marport PRO M6 Service Manual

4 Connection to an Ethernet switch if you need to be connected to both an Internet connection and external
devices. Use a USB to Ethernet adapter.
5 USB splitter
6 Scala2 software dongle
7 USB trackball transmitter of the wireless trackball mouse
8 Connection to Mx computer using CAT5e network cable
9 Connection to Mx receivers using CAT5e network cables
10 Power supply (recommended power supply: MEAN WELL HEP-150-24 A)
* We recommend to use an Uninterruptible Power Supply (UPS) to prevent problems if
the mains power fails.

Powering the Mx computer

Important: Only use recommended power supply MEAN WELL HEP-150-24
A. Marport cannot not be held responsible for dysfunction of the system if
recommended equipment is not used.
1. Connect the power cable to the Mx computer.
2. Connect MEAN WELL power supply to a power socket.
3. Press on the Mx computer to switch it on.
M6 PRO | V7 | Installation
74